|
Post by jxn on May 31, 2018 6:11:00 GMT
Please advise: Best way to use DeramScreen on a 120 inch screen?
|
|
|
Post by Admin on May 31, 2018 14:11:47 GMT
We suggest getting the 2-Flex Kit as it fits screens up to 130". Each Flex Reel would cover two sides of the screen and each will be plugged into an LED port on the Hub.
|
|
|
Post by jxn on Jun 1, 2018 3:50:03 GMT
Thx for the quick reply. In one of your DIY vids you mention that a max of 250 LED's (45-80-45-80) is what is supported. Will the reel, on that size screen, produce more than 250? I don't want to have color gaps.
|
|
|
Post by Admin on Jun 1, 2018 14:39:09 GMT
No, 250 is the current maximum supported by the programming. The 2-Flex Kit should fit a 120" screen with no gaps though since it is made to fit up to 130".
|
|
|
Post by jxn on Jun 2, 2018 6:01:55 GMT
Last question. Are they weatherproof and/or have a protective clear coating around them?
|
|
|
Post by Admin on Jun 4, 2018 14:46:25 GMT
The Flex LEDs do not have the protective coating because they need to be folded 90 degrees at the corners. The clear coating would not allow for this.
|
|