|
Post by alexbolduc on Apr 30, 2019 13:54:46 GMT
Hello here my setup. All source going to my AVR and the output go to a splitter, the splitter go out1 to TV and out2 to DS4k. That way I eliminate the loosing source and flickering of image on the TV when I use the DS as a switch. XBOX X (4K) --------> ----> Samsung Q7F Pioneer VSX-933 ---> Splitter Cable Box (1080i) --> ----> DS4K The biggest problem is when Im on the XBOX X in 4K all the light work as a charm (Thank good I found the good setting) but when I switch on my AVR to my Cable Box (1080i) half of the light turn off and only the half up light stay on from the middle to TV to top. The Matrix of color are off and look like since the signal was half resolution the two end of the strip where the light are on seems to connect together so the light will be distributed all around correctly. I'm not sure I'm clear in my explanation. I'ill post photo as soon I come home to explain my problem. If I turn off and the DS in my iPhone Apps all the light switch back normal and work perfectly. Thanks a lot if you have some clue on how to fix this. EDIT/Photos added: Badly assing when switching to 1080i source drive.google.com/file/d/1j5Yd-8nSWFUk1d3rExP8e-a1lhcshH8d/view?usp=sharingdrive.google.com/file/d/1qweZAam5nsRaZ12ruDeRRS2RaMoDyVtH/view?usp=sharingGoodly assing when turning off ans on the DS4K drive.google.com/file/d/1tDsWGC-jpV9XW_O_T5JNI4lWbzZyxf5p/view?usp=sharing
|
|
|
Post by Guest on Jun 13, 2019 20:38:55 GMT
Got a similar issue.
|
|
|
Post by nachobizniz on Jun 17, 2019 1:09:02 GMT
Not sure if it works interlaced or not, I'll do some digging. Is this still giving you problems?
|
|