|
Post by frankenscreen on Sept 19, 2017 5:47:13 GMT
I know, the apa102 is not supported. My question is: can i use the 4k hub+diy cable with an external 12V PSU for apa102 LEDs? My goal is to reuse parts of my custom FHD ambilight. Data information via the diy cable, power from a 80W/12V PSU.
|
|
|
Post by Admin on Sept 19, 2017 17:07:58 GMT
The DreamScreen DIY currently will work with WS2812B, SK6812, APA104, and WS2813 digital RGB LED lights. We do not currently support other LEDs at this time.
|
|
|
Post by kyle on Sept 26, 2017 15:35:45 GMT
frankenscreen, that still will not work. APA102 uses 2 wire SPI, while WS2812B (and others listed above) use a single wire protocol.
|
|