16v
New Member
Posts: 3
|
Post by 16v on Mar 21, 2019 9:29:09 GMT
Hello
My DS 4K wont turn on with TV.
BUT this is only when it was powerless!
When DS is in standby usb power works well.
Cec power detect is "faulty" . After a while leds begin flashing and then stop working.
This happens when cec power is activated.
TV: jtc/jaytec
AVR: Denon.
|
|
|
|
Post by Admin on Mar 21, 2019 14:07:14 GMT
Not all devices will be able to react correctly via CEC as the CEC signals are. Or exactly standardized throughout the industry. What are all the video devices you are using?
|
|
16v
New Member
Posts: 3
|
Post by 16v on Mar 21, 2019 16:08:21 GMT
Yes. This is what i figuered out.
But usb power also dont work.
Only when device is in standby. Not when it was completely powered off.
My devices are a jrc/jaytec tv and a denon 1910 avr.
|
|
|
|
Post by Admin on Mar 21, 2019 18:26:19 GMT
What is the other end of the USB cable plugged into? If it is the TV, then check the settings of the TV and see if you can adjust them to turn off power to the USB ports when the TV is off.
|
|
16v
New Member
Posts: 3
|
Post by 16v on Mar 21, 2019 20:46:19 GMT
Like i said:
Its a DS problem.
When only in standby it works well.
But after complete power off (switch on power supply) it wont work.
|
|
