|
|
Post by souL on Oct 5, 2017 20:56:35 GMT
The new HD Kit with 2 Sidekicks arrived today and the LEDs seem to work properly, but my TV receives only a stereo signal.
My setup is pretty simple and common I guess
PS4 -> DreamScreen HD Kit -> Samsung TV (UE55J6250SU) -> S/PDIF out to 5.1 Receiver
I tried the following settings:
PS4: Bitstream + DTS or Dolby (tried both, same results)
TV: Bitstream, but DTS and Dolby are greyed out. Only Stereo and DTS Neo 2:5 is available
If I connect the old Dreamscreen splitter i can run both DTS and Dolby without any problems.
Any ideas?
|
|
|
|
Post by Ausbat on Oct 12, 2017 4:20:29 GMT
I am having the same issue with this setup:
Apple TV - Dreamscreen HD - LG OLED TV - S/PDIF to Onkyo receiver
|
|
|
|
Post by Scy on Oct 12, 2017 15:41:32 GMT
I am having the same issue with this setup: Apple TV - Dreamscreen HD - LG OLED TV - S/PDIF to Onkyo receiver Have a similiar setup... doesnt work only stereo... how do i fix this? |
|
|
|
Post by kyle on Oct 24, 2017 14:24:40 GMT
The 1.2.1.7 firmware coming out soon addresses an EDID issue regarding surround sound that may potentially resolve this issue. Contact us directly if you would be interested in getting access to the new firmware now.
|
|
|
|
Post by hulkdad on Oct 25, 2017 13:09:42 GMT
If your receiver has HDMI input/output available, it would be best to route everything through the receiver via HDMI and then out to the Dreamscreen and out to the TV. This will segregate the Dreamscreen to handling only the video portion of the signal and remove the legacy spdif connection from the system allowing the receiver to decode the audio instead of the TV converting from HDMI, to spdif, and then the receiver having to decode that signal. If you would like to use Dolby TrueHD/DTS-MA, it would also have to go through this connection. Finally, through the HDMI, if you don't have a Dolby TrueHD/DTS-MA compatible receiver, you can have the PS4 decode and output PCM through HDMI and you'll still get the benefit of the increased audio bandwidth and quality, but it will not work with spdif, it will only output Dolby legacy/DTS legacy at best through this connection.
|
|
soul
New Member
Posts: 1 
|
Post by soul on Nov 5, 2017 8:19:23 GMT
The 1.2.1.7 firmware coming out soon addresses an EDID issue regarding surround sound that may potentially resolve this issue. Contact us directly if you would be interested in getting access to the new firmware now. Firmware update fixed my problem. Ty Kyle |
|
|
|
Post by kyle on Nov 6, 2017 14:07:06 GMT
Thanks for the confirmation. The 1.2.1.7 firmware update is being publicly rolled out now; if anyone else is interested, check the App Store/Play Store for app version 1.6
|
|
|
|
Post by butze1979 on Jan 16, 2018 13:38:24 GMT
I am glad that I can use my dreamscreen as follows. any source -> Yamaha RX-A2010 -> Monitor out 1 -> TV LG 55LW659s Monitor out 2 -> Dreamscreen  no problems except the dreamscreen sometimes freezes, then only helps to pull power plug |
|
|
|
Post by Heffa on Apr 28, 2018 4:06:22 GMT
got my kit today
cant get either dobly or dts working
everything is up to date and cable are good
going into a sound bar and out the sound bar to the tv
|
|
|
|
Post by Admin on Apr 30, 2018 14:10:40 GMT
Heffa,
Are you using an HD or 4K unit?
|
|
